View HTML Version of Newsletter





Hot Work: Don't Play With Fire

 ‚Äč  

Twitter 

     
3/27/2023
Published
Every Monday by
Grain Journal
Editor Kendall Trump
Unsubscribe
Hot work has been the cause of numerous fires and grain dust explosions.
     

Hot work includes, but is not limited to, brazing, cutting, grinding, soldering, and welding.

The heat generated from these activities can ignite combustible dust on surfaces and in suspension easily, resulting in smoldering fires, flash fires, and combustible dust explosions.

Grain dust ignition temperatures vary by commodity, but generally fall within the range of 700 degrees and 900 degrees F. The heat generated by hot work can ignite grain dust easily.

Consider the heat produced by the following hot work activities:

  • Arc welding - 10,000 degrees F.
  • Oxy-acetylene cutting - 5,000 degrees F.
  • Grinding (metal) - 1,200 degrees F.

The required precautions listed on hot work permits reflect the requirements of OSHA's Welding, Cutting, and Brazing Standard 1910.252 (a). This section is also referenced in the Grain Handling Standard 1910.272.

Ensure that the following precautions (if applicable) are taken prior to hot work activities:

  • Ensure that sprinklers and host streams are in service and operable.
  • Ensure that hot work equipment is in good condition (welding leads, torches, etc.)
  • Ensure that fire extinguishers, hose streams, etc. are operable.
  • Ensure the removal of dust, lint, debris, flammable liquids, and oily deposits.
  • Ensure that explosive atmospheres in the area are eliminated.
  • Wet down or cover combustible floors with damp sand or fire blankets.
  • Remove flammable or combustible materials, or protect them with fire blankets, guards, or metal shields.
  • Cover all floor and wall openings (hatches, lids, etc.).
  • Install fire blankets and curtains under and around work.
  • Protect, close, or shut down ducts, spouts, conveyors, bucket elevators, etc. that may carry sparks to distant combustible materials or suspended dust.
  •  Clean all enclosed equipment of combustible materials (i.e., grain dust).

Hot work presents unique hazards to the grain industry. Do not play with fire!

Source: Joe Mlynek is president of Progressive Safety Services LLC, Gates Mills, OH: joe.mlynek@progressivesafety.us, and content creation expert for Safety Made Simple, Inc., Olathe, KS; joe@safetymadesimple.com

 

 Safety Tip of the Week Archives

Safety Webinar Archives Link

Current Issue:

 



USEFUL INFO
Product/Service Directory
Equipment Catalog
Digital Edition Archives
2018-19 Grain/Feed/Milling Convention Calendar




 
 
 
 
         

         
 Grain Journal is a bi-monthly magazine for the grain and feed industries 
published in Decatur, IL - 800-728-7511 | website: www.grainnet.com
Click here to forward this newsletter to a friend.